HBW Destination Choice Model (C03)

Production & Attractions by Model

dc = {
  const modT = transpose(dist_sum_mod);
  const obsT = transpose(dist_sum_obs);

  return modT.map(m => {
    const o = obsT.find(d =>
      d.p_DistLrg === m.p_DistLrg &&
      d.a_DistLrg === m.a_DistLrg &&
      d.Source === m.Source
    );

    if (!o || o.total_trips === 0) return null;

    return {
      p_DistLrg: m.p_DistLrg,
      a_DistLrg: m.a_DistLrg,
      Source: m.Source,
      tmeMod: m.total_trips,
      tmeObs: o.total_trips,
      // Added Percent Error calculation for the second chart
      tmeErrorPct: (m.total_trips - o.total_trips) / o.total_trips
    };
  }).filter(d => d !== null);
}

// Source Selection
viewof vSource = Inputs.select(
  Array.from(new Set(dc.map(d => d.Source))).sort(),
  { label: "Model Source:" }
)

// Filtered data based on selection
dc_filtered = dc.filter(d => d.Source === vSource)

// Shared Max for the Scatter Plot axes
chartMax = d3.max(dc_filtered, d => Math.max(d.tmeObs, d.tmeMod))

// CHART 1a: Model vs Observed Trips
Plot.plot({
  grid: true,
  width: 460,
  height: 380,
  marginRight: 50,
  caption: html`<h4>1a. Model vs Observed Trips</h4>`,
  x: { label: "Observed Trips", domain: [0, chartMax] },
  y: { label: "Modeled Trips", domain: [0, chartMax] },
  marks: [
    // Fan Reference Lines (+/- 10% increments)
    Plot.link([0.6, 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4], {
      x1: 0, y1: 0,
      x2: (k) => (k <= 1 ? chartMax : chartMax / k),
      y2: (k) => (k <= 1 ? chartMax * k : chartMax),
      strokeOpacity: (k) => k === 1 ? 1 : 0.2,
      stroke: "gray",
      strokeWidth: (k) => k === 1 ? 2 : 1
    }),
    // Labels for Fan Lines
    Plot.text([0.6, 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4], {
      x: (k) => (k <= 1 ? chartMax : chartMax / k),
      y: (k) => (k <= 1 ? chartMax * k : chartMax),
      text: (k) => k === 1 ? "Equal" : d3.format("+.0%")(k - 1),
      textAnchor: "start", dx: 6, fill: "gray", fontSize: 10
    }),
    // Data Points
    Plot.dot(dc_filtered, {
      x: "tmeObs", 
      y: "tmeMod", 
      r: 3, // Slightly larger dots are easier to hover
      fill: "rgb(80, 116, 230)", 
      fillOpacity: 0.5,
      // Add Tooltip data here:
      tip: true,
      title: (d) => 
        `District: ${d.p_DistLrg} to ${d.a_DistLrg}\n` +
        `Observed: ${d3.format(",.0f")(d.tmeObs)}\n` +
        `Modeled: ${d3.format(",.0f")(d.tmeMod)}`
    }),
    // Regression Line
    Plot.linearRegressionY(dc_filtered, {
      x: "tmeObs", y: "tmeMod",
      stroke: "rgb(80, 116, 230)", strokeDasharray: "4 4"
    })
  ]
})

// CHART 1b: Percent Error
Plot.plot({
  grid: true,
  width: 460,
  height: 380,
  caption: html`<h4>1b. Model vs Observed Percent Error</h4>`,
  x: { label: "Observed Trips", domain: [0, chartMax] },
  y: { label: "Percent Error", domain: [-2, 2], tickFormat: d3.format(".0%") },
  marks: [
    Plot.ruleY([0], { stroke: "#000", strokeWidth: 1.5 }),
    Plot.dot(dc_filtered, {
      x: "tmeObs", 
      y: "tmeErrorPct", 
      r: 3, 
      fill: "rgb(80, 116, 230)", 
      fillOpacity: 0.5,
      // Add Tooltip data here:
      tip: true,
      title: (d) => 
        `District: ${d.p_DistLrg} to ${d.a_DistLrg}\n` +
        `Observed: ${d3.format(",.0f")(d.tmeObs)}\n` +
        `Error: ${d3.format("+.1%")(d.tmeErrorPct)}`
    }),
    // The Validation "Staircase" (Targets)
    Plot.line([[0, 1.0], [500, 1.0], [500, 0.5], [1000, 0.5], [1000, 0.25], [chartMax, 0.25]], 
      { stroke: "gray", strokeWidth: 1.5, strokeDasharray: "2 2", curve: "step-after" }),
    Plot.line([[0, -1.0], [500, -1.0], [500, -0.5], [1000, -0.5], [1000, -0.25], [chartMax, -0.25]], 
      { stroke: "gray", strokeWidth: 1.5, strokeDasharray: "2 2", curve: "step-after" })
  ]
})

Production & Attractions by Vehicle Ownership & Income Category

dc_2 = {
  const modT2 = transpose(dist_sum_mod2);
  const obsT2 = transpose(dist_sum_obs2);

  return modT2.map(m => {
    const o = obsT2.find(d => 
      d.p_DistLrg === m.p_DistLrg && 
      d.a_DistLrg === m.a_DistLrg && 
      d.veh_inc === m.veh_inc
    );

    if (!o || o.total_trips === 0) return null;

    return {
      p_DistLrg: m.p_DistLrg,
      a_DistLrg: m.a_DistLrg,
      veh_inc: m.veh_inc,
      Source: m.Source,
      tmeMod: m.total_trips,
      tmeObs: o.total_trips,
      tmeErrorPct: (m.total_trips - o.total_trips) / o.total_trips
    };
  }).filter(d => d !== null);
}

// 2. STABLE SELECTIONS
// Get the list of incomes ONCE from the master list
vincs_list = Array.from(new Set(dc_2.map(d => d.veh_inc))).sort()

// Model Type Selection
viewof vSource_2 = Inputs.select(
  ["Destination Choice", "Gravity"],
  { label: "Model Type:", value: "Destination Choice" }
)

// Vehicle Income Selection (Uses the stable vincs_list)
viewof vVehInc_2 = Inputs.select(
  vincs_list, 
  { label: "Vehicle-Income:", value: vincs_list[0] }
)

// 3. FINAL FILTERING
// This is the only part that reacts to the dropdowns
dc_filtered_2 = dc_2.filter(d => d.Source === vSource_2 && d.veh_inc === vVehInc_2)

// Shared Max for the Scatter Plot axes
chartMax_2 = d3.max(dc_filtered_2, d => Math.max(d.tmeObs, d.tmeMod))

// CHART 2a: Model vs Observed Trips (by Vehicle Income)
Plot.plot({
  grid: true,
  width: 460,
  height: 380,
  marginRight: 50,
  caption: html`<h4>2a. Model vs Observed Trips (Income Group)</h4>`,
  x: { label: "Observed Trips", domain: [0, chartMax_2] },
  y: { label: "Modeled Trips", domain: [0, chartMax_2] },
  marks: [
    // Fan Reference Lines
    Plot.link([0.6, 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4], {
      x1: 0, y1: 0,
      x2: (k) => (k <= 1 ? chartMax_2 : chartMax_2 / k),
      y2: (k) => (k <= 1 ? chartMax_2 * k : chartMax_2),
      strokeOpacity: (k) => k === 1 ? 1 : 0.2,
      stroke: "gray",
      strokeWidth: (k) => k === 1 ? 2 : 1
    }),
    // Labels for Fan Lines
    Plot.text([0.6, 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4], {
      x: (k) => (k <= 1 ? chartMax_2 : chartMax_2 / k),
      y: (k) => (k <= 1 ? chartMax_2 * k : chartMax_2),
      text: (k) => k === 1 ? "Equal" : d3.format("+.0%")(k - 1),
      textAnchor: "start", dx: 6, fill: "gray", fontSize: 10
    }),
    // Data Points
    Plot.dot(dc_filtered_2, {
      x: "tmeObs", 
      y: "tmeMod", 
      r: 3, // Slightly larger dots are easier to hover
      fill: "rgb(80, 116, 230)", 
      fillOpacity: 0.5,
      // Add Tooltip data here:
      tip: true,
      title: (d) => 
        `District: ${d.p_DistLrg} to ${d.a_DistLrg}\n` +
        `Income/Veh: ${d.veh_inc}\n` +
        `Observed: ${d3.format(",.0f")(d.tmeObs)}\n` +
        `Modeled: ${d3.format(",.0f")(d.tmeMod)}`
    }),
    // Regression Line
    Plot.linearRegressionY(dc_filtered_2, {
      x: "tmeObs", y: "tmeMod",
      stroke: "rgb(80, 116, 230)", strokeDasharray: "4 4"
    })
  ]
})

// CHART 2b: Percent Error (by Vehicle Income)
Plot.plot({
  grid: true,
  width: 460,
  height: 380,
  caption: html`<h4>2b. Model vs Observed Percent Error (Income Group)</h4>`,
  x: { label: "Observed Trips", domain: [0, chartMax_2] },
  y: { label: "Percent Error", domain: [-2, 2], tickFormat: d3.format(".0%") },
  marks: [
    Plot.ruleY([0], { stroke: "#000", strokeWidth: 1.5 }),
    Plot.dot(dc_filtered_2, {
      x: "tmeObs", 
      y: "tmeErrorPct", 
      r: 3, 
      fill: "rgb(80, 116, 230)", 
      fillOpacity: 0.5,
      // Add Tooltip data here:
      tip: true,
      title: (d) => 
        `District: ${d.p_DistLrg} to ${d.a_DistLrg}\n` +
        `Observed: ${d3.format(",.0f")(d.tmeObs)}\n` +
        `Error: ${d3.format("+.1%")(d.tmeErrorPct)}`
    }),
    // The Validation "Staircase" (Targets)
    Plot.line([[0, 1.0], [500, 1.0], [500, 0.5], [1000, 0.5], [1000, 0.25], [chartMax_2, 0.25]], 
      { stroke: "gray", strokeWidth: 1.5, strokeDasharray: "2 2", curve: "step-after" }),
    Plot.line([[0, -1.0], [500, -1.0], [500, -0.5], [1000, -0.5], [1000, -0.25], [chartMax_2, -0.25]], 
      { stroke: "gray", strokeWidth: 1.5, strokeDasharray: "2 2", curve: "step-after" })
  ]
})